• Home
  • 103
  • 62cc Gas Chainsaw 20" Bar Gasoline Powered Chain Saw 2 Cycle Engine Cutting Saw Kit 4000W

62cc Gas Chainsaw 20" Bar Gasoline Powered Chain Saw 2 Cycle Engine Cutting Saw Kit 4000W

103.00
        SPECIAL OFFER

          Please select all product options

          Product was out of stock

          share

          🎁Some products are for clearance!

          🔥Limited stock at this price!

          ⏰The time for the clearance activity is limited!

          🎁Some products are for clearance!

          🔥Limited stock at this price!

          ⏰The time for the clearance activity is limited!

          Description

          2Stroke Gasoline Chainsaw 20" Bar Powered Engine Wood Cutting Gas Chain Saw 62CC

          Product function description:

          NOTE:
          Installation Manual Is NOT Included
          Professional Installation Is Highly Recommended

          Description:
          This chain saw is sharp to cut the twigs, branches, bushes, shrubs and trees. The saw is waterproof and rustproof, easy to clean with water. With exceptional hardness and durability, it is good for sawing, cutting, pruning and trimming wood, perfect tool for gardening, wordworking, landscaping.

          Features:
          Color: black+red
          Material: metal.
          Bar Length:20 in
          Pitch: 0.325''
          Sprocket: 7T*0.325''
          Chain width: 0.058''
          Power: 4000W
          Gas Displacement: 62CC(cm3)
          Rotating Speed:12500(rpm)
          Fuel capacity: 550(ML)
          Oil capacity: 260(ML)
          Voltage:12 V


          NOTE
          Structure chart:

          Guide chain installation step diagram:

          Step 1: Install the guide plate
          Step 2: Install the chain
          Step 3: Align the holes to install the side cover and screw on the nut
          Step 4: Adjust the tightness of the chain
          Step 5: Sleeve lock nut
          Fuel injection volume can be adjusted

          Step 1:
          Add engine oil. The function of engine oil is to lubricate the chain, so you must wait for the oil to spray out before you can go to the tree.
          Step 2:
          Add gasoline. The ratio of gasoline to oil is 25:1 or 20:1, 20:1 is recommended (must be two-stroke oil, and Mobil two-stroke oil is recommended). Do not use four-stroke engine oil or other engine oil, otherwise it will easily cause cylinder pulling or other problems

          1. Pull up the flame out switch
          2. Pull out the damper
          3. Pull the start handle
          Pull the start handle 3-6 times. When you hear the machine banging, push the damper back in, otherwise the machine will not start.
          4. Close the damper
          Turn off the air door, pull the start handle 1-3 times again, you can start normally

          Gross weight:6.5kg
          Size:58*27*33cm

          Package includes:
          1 x Hand saw
          1 x Funnel
          1 x Proportioning pot